Automotive
10A, Single Pole, Single Throw Toggle Switch, Use On 12V DC Circuits With A Maximum, Of 10A, Zinc Die Cast Product With 12" Of Lead Wire On Both Positive & Negative Contacts, 1/2" Mounting Stem For Mounting On A Panel Or Dashboard.
35A, Single Pole, Single Throw, Heavy Duty Toggle Switch, Use On 12V DC Circuits With A Maximum Of 35A, Made Of Zinc Died Cast Material & Is Used For A Simple On/Off Function.
Universal Push/Pull Switch, For Off/On Operation In A 12V DC Circuit With A 15A Maximum Capacity, Metal Product With A Round Black Plastic Handle, 1/2" Diameter Mounting Stem For Mounting On A Panel Or Dashboard.
15A, Momentary On Push Button Switch, Used On 12V DC, 15A Maximum Circuits, Metal Part With Chrome Plated Service & Brass Contacts, 2 Contacts With Screws To Hold Circuit Wires In Place For Use, 1/2" Diameter Mounting Ring & Container For Dash Or Panel Mounting.
General Purpose, Ignition Switch, With A Set Of 2 Keys, Use On 12V DC 30A Maximum Circuits Only, Switch Has 4 Positions When Installed, Accessory, Off, Ignition & Start, Metal Die Cast Part.
2 Pack, Felt Color, Terminal Protector Pad, 1 Green & 1 Red, Put Between The Battery & The Battery Terminal To Protect The Surface Of The Battery From Wear & To Prevent Corrosion Between The Battery & The Terminal, Can Be Used For Top Of Wide Mount Terminals.
Lead Based Top Post Replacement Battery Terminal Kit, Includes A Red + Terminal & A Black - Terminal That Will Securely Fit Any Top Post Automotive Battery, Bolt On Construction Type & Will Accept 1 Awg To 6 Awg Battery Cable Sizes.
Universal, Top Post Replacement Terminal, For A Top Post Automotive Battery, A Lead Terminal To Reduce Corrosion & To Prevent Rusting, Bolt On Style Terminal For Use With Cable Sizes Of 1 Awg To 6 Awg & Has A 11/16" Diameter Post Capacity, Fit Either Positive Or Negative Battery Post.
Side Mount Post Terminal, For Automotive Batteries, Made Of Lead To Reduce Corrosion & Rust, Equipped With A 3/8" Side Mount Terminal Bolt To Secure The Vehicles' Battery Cable To The Battery, Bolt On Style & Will Fit Cable Size From 1 Awg To 6 Awg.
Side Terminal Charging Post, Set Of 2, Use To Adapt Any Standard Side Post Automotive Battery With 3/8" Diameter, Threaded Battery Terminal Holes To Allow A Battery Charger Clamp Or Booster Cable Clamp To Be Hooked To The Battery Without Removing The Side Mounted Cables, Use On 12V DC Batteries Only.
Universal, Marine Style Battery Terminal, With A Brass Wing Nut To Accept A Cable With A 3/8" Or 5/16" Stud Hole, Will Fit A 3/4" Or 11/16" Battery Post Diameter, Made Of Lead With A Zinc Plated Stud & Brass Wing Nut To Prevent Corrosion.
Top To Side Battery Terminal Adapter, Use To Adapter A Standard Top Post Terminal Automotive Battery To A Side Post Terminal Battery, Set Of 2 Terminals Made Of Cast Lead Material, Side Mount Holes Are 3/8" Threaded Holes To Accept A Standard Post Screw.
Heavy Duty, Top Post Battery Terminal, For Heavy Duty Cable Sizes, Bolts Onto A Stripped Battery Cable With A Size Range Of 2 Awg & 4/0 Conductors, Made Of Lead & Will Fit Both A 3/4" Or 11/16" Diameter Battery Post.
4 Awg Copper Lug, Has A Crimp On Connection Style & Fits A Terminal Stud Of 5/16" Diameter, Clamshell.
2 Awg Copper Lug, Has A Crimp On Connection Style & Fits A Terminal Stud Of 3/8" Diameter.